1) Analyzing recent changes.
2) Pinpointing the cause of the problem.
3) What kind of problem is it?
4) Who's having the problem?
5) Checking the physical media could be very helpful especially when it turns out the network cable is unplugged!!
Tips
If one user reports a problem, more often than not the problem stems from some change the user made.
If several users report the same problem, identify its magnitude, is everyone affected on that network or subnet.
Are the people in one workgroup, subnet or floor affected?
Tools to Use
Ipconfig
You can use ipconfig cmd to get a quick snapshot of the machines ip configuration.
The /all switch causes ipconfig to display everything it knows about the current IP configuration.
It will display:
MAC address of each NIC
WINS configuration if any
IP address being used for the preferred and alternate DNS servers.
The Ping Tool
This sends out four ICMP ping packets and measures the minimum, maximum and average round trip times and percentage.
You can establish number of hops because default TTL(Time To Live) is 255 and each routing device that routes packets subtracts 1 from the TTL value.
When a packets TTL hits zero it is dropped.
The Tracert Tool
Tracert begins by sending one ICMP ping packet with a TTL of 1.
That means the first router or gateway to encounter it will send and ICMP response, decrement the packets TTL, it becomes zero and the packet is dropped.
Tracert sends a second packet with a TTL of 2, the first device responds and decrements the TTL and then routes the packet to the next hop.
The Pathping Tool
The pathping tool provides the functionality of both ping and tracert. It adds some of its own ingredients into the melting pot.
The ideal packet loss should be zero, with exceptions when it comes to VoIP, but if you are having routing problems you might spot a mulfunctioning router by seeing where along the line you are losing packets.
The most useful switch to know is the -n switch which only displays IP address of each hop rather than resolving the name.
Using Nslookup
The nslookup tool allows you to quiry a DNS server to see what information it holds for a host record e.g F:\>nslookup computermagic.wordpress.com
If you run nslookup with no command line arguments it goes into interactive mode.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment